Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 2.5
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Transmission Distance: 2.6
PLA BambuLab Basic Pink Transmission Distance: 8

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #8 (0.72mm) swap to Jade White
At layer #16 (1.36mm) swap to Purple
At layer #22 (1.84mm) swap to Pink for the rest.