Anycubic FEP Spacer Pucks - Mono X - Mono X 6K - M3 Plus Free 3D print model

Set the right amount of slack on your Anycubic Mono X, Mono X 6K, and/or M3 Plus FEP with this spacer puck. It was designed with measurements taken from an OEM FEP installation, so achieving proper tension/tuning should be fairly easy.

Three files included for download: one for FDM printing and two for SLA. SLA version features divot to reduce the amount of contact between the puck and the FEP, FDM version omits this feature to help produce a smoother/more uniform top layer.

Sanding required if printing FDM and polishing recommended in either case to reduce friction and the risk of FEP scarring during installation.

Tested with Anycubic FEP for the Mono X, with both SLA and FDM versions.

Please note: This puck was designed using measurements from a Mono X. As far as we're aware the Mono X, Mono X 6K, and M3 Plus all share the same vat design. In the event that the M3 Plus or Mono X 6K require different spacing / tuning, let us know as soon as possible so that we can make make any necessary updates.

Not tested with 3rd party vats.