A1 MINI AMS 10mm SHORTER TOP MOUNT RISER / PRINTABLE ON A1 MINI Remixed by Spar-Fuchs24.de

Remixed by

Spar-Fuchs24.de

3D Printer>3D Printer Parts

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 4 walls, 15% infill

Designer

3.3 h

1 plate

4.8(55)

Boost

104

181

398

299

Released

Description

Deutsch:

Deutsch:

Das ist ein Remix des A1 Mini AMS Risers.

In meinem Profil findest du auch die längere Variante in einem Stück.

Diese Variante hier ist 10mm kürzer und somit druckbar auf dem A1 Mini.

Falls du die 10mm längere Variante möchtest, check mein Profil.

Da ich das ganze etwas stabiler wollte (es wackelt doch sehr arg) habe ich mich ans CAD gesetzt und das Verbindungsloch entfernt und die zwei Teile zusammengefügt, somit hat man mehr Stabilität und es wackelt auch nichts mehr!

Check das Video: HERE

English:

This is a remix of the A1 Mini AMS Riser.

In my profile you can also find the longer version in one piece.

This version here is 10mm shorter and therefore printable on the A1 Mini.

If you want the 10mm longer version, check my profile.

Since I wanted the whole thing to be a bit more stable (it wobbles a lot), I sat down at the CAD and removed the connecting hole and joined the two parts together, so you have more stability and nothing wobbles anymore!

Check the Video: HERE

Comment & Rating (78)

@Emir3D

Print Profile

0.2mm layer, 4 walls, 15% infill

L’AMS Lite va parfaitement bien dessus. Bien régler les paramètres pour du PETG, pas facile du premier coup à imprimer. Pour ma part j’ai modifié le remplissage ^^ Mais sinon au top! Plus qu’a essayé et voir si cela ne vibre pas trop durant l’impression. Je ferai des essais!

@AllanFonroques

Pas trop difficile l'accès aux bobines de derrières ?

@3dprintsnthingz

how is it holding up i just printed this

@GrauWerke

Print Profile

0.2mm layer, 4 walls, 15% infill

This is probably my favorite print so far. The whole system is so much more compact, now. I’ve done several tall prints with no discernable quality issues, but it’s easy enough to unstack if needed. I was (maybe still am) a bit concerned about reusing the hardware from cap on the top of the tower. It’s quite small/short and not meant for load-bearing. But I’ve had no issues after ~50 hours of printing. I’ll take the risk to use this eloquent mount over the other more cumbersome stacking designs.

@fitzcrafter

made mine with transparent blue PETG. excellent job designing the print. saves a ton of space and no wobble.

@kirylukv

Print Profile

0.2mm layer, 4 walls, 15% infill

Love the extra space I gained with this print!

@biggusdickus

Print Profile

0.2mm layer, 4 walls, 15% infill

This print was perfect for my needs! I just got my a1 mini and can’t fit the AMS lite on the table next to it, so I wanted to top mount it. The mount is perfect, holds a full AMS lite with no noticeable wobbles. Printed in Inland PLA+ (high speed, black)

@luke19101990

Print Profile

0.2mm layer, 4 walls, 15% infill

awesome

@imjustjade2020

This was the best print out there! I tried a different one but the indention where the Z-Rod was was not deep enough and it would not allow it to turn so I couldn't even use my printer...

@jclngrrd

Nice piece ! Looking for AMS top mount on A1 Mini, this one is good looking and declutter the place 👌. Wobble a little bit on fast print, but seems ok. Printed with PLA Matte Basic, strong enough for my use !

@tdk1980

Print Profile

0.2mm layer, 4 walls, 15% infill

I printed in pla tough in anticipation of my mini arriving as I was limited on space. it’s perfect, great profile. great design.

@Jay_Foster515

Print Profile

0.2mm layer, 4 walls, 15% infill

5 star, but the app wouldn’t let me. I’m not sure if it was my printer (which I feel like it was) but my print came out weird. but! I love this idea and design! I don’t know how I would have done the AMS while keeping it in my enclosure, otherwise.