'Monster' Comb
'Monster' Comb
Published 2017-03-20T12:29:03+00:00
The 'Monster' Comb is a fun and functional comb that will appeal to people who like the 'Monster' energy logo.
The comb is compact at only 110mm wide and 4.25mm thick. The prongs are tapered just like a normal comb down to 1.5mm so the prongs are strong. As the number of prongs are limited in keeping with the Monster 'M' logo it's not as fine as a regular comb but still works okay... the hardness of the PLA makes it a fraction harder on your head but nothing tat would bother a 'Monster'.
This is a relatively quick and easy print that is both fun and has a practical application.
Please refer to the images and print instructions for additional information.... and post images of your combs!
Note: If you like this check out the rest of my fun and practical designs.
Recommend using Raft for ease of print removal from the build plate and to ensure the prongs aren't damaged during removal.
Works well in PLA. use 25% or more infill to ensure it's strong enough to deal with 'tangled Monster hair'.
Date published | 20/03/2017 |
Technology | FDM |