DICE x carriage adapted to OpenBuilds mini v wheel plate

Prints (0)

Description

[3/1/2017] Update: Revise "X_Carriage_hotendhalter_magnetischV4.stl" and "X_Carriage_hotendhalter_base_magnetischV3.stl" adjusted tolerance and making magnet harder to push in. Once in, friction will hold the magnet good. Added 3rd magnet that will hold bottom portion to screw to eliminate unintended "wiggly" at bottom portion. 

[2/26/2017] Update: Revise "X_Carriage_hotendhalter_magnetisch_V3.stl" and "X_Carriage_hotendhalter_base_magnetisch_V2.stl" adjusted tolerance and making it easier to disconnect from magnet

[2/9/2017] Update: change the M4 nut insert from bottom to maintain the original DICE look smooth top finish. Added blow up rendering picture.

[2/8/2017] Update: change the brass insert nut to regular M4 nut. Added Opensource logo above DICE

This work is based on original work by Rene Jurack. More info about DICE 3D printer and its BOM  http://well-engineered.net/

Required:

- E3D V6

- (3) M5x8 to attach to Openbuild mini v wheel plate

- (5) 5mm x 10mm round permanent magnet

- [(2) regular M4 nut insert] as of 2/9/2017 superseeded with "X_Carriage_hotendhalter_magnetischV2.stl" this version use (2) M4 nut inserterted from bottom 

- (2) M4x20

- OpenBuilds mini v wheel plate http://openbuildspartstore.com...

Design Files

File Size

X_Carriage_hotendhalter_buegel.stl
96.2 KB
X_Carriage_lüfterhalter_V3V1.stl
560 KB
X_Carriage_hotendhalter_magnetischV4.stl
197 KB
X_Carriage_hotendhalter_base_magnetischV3.stl
109 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×