Knob with Cap Screw for music stand

Summary Several Music stands at church had stripped out threads and the bolts could not be replaced without destroying the knob. As you can see I have made this one with a replaceable cap crew in it. I have included Home Depot part numbers If you cant see pictures then: Everbilt Cap screw M6-1.0 x 50mm no. 887480015188 Everbilt Hex Nut M6-1.0 only needed if original nut is stripped too. no. 887480037586 I finished the build by using a 15/64 drill bit on the hole and a wood chisel on the hex head. I wanted it tight so made it slightly smaller. This was designed in AutoDesk 123D Design B-) Print Settings Printer: Dremel 3D20 Rafts: No Supports: No Resolution: .2 Infill: 20