Specialized Bike Map Holder
Specialized Bike Map Holder
3D
Published 2014-06-23T15:17:43+00:00
This is an arm bracer, worn on the forearm, with the purpose of holding a note or small map, such that a cyclist can have a quick glance while riding.
Overall this is meant to appeal to riders who would like a more streamline approach to a note/map holder, rather than a large "paddle" on the handle bars.
Specialized Bicycle Components, more commonly known simply as Specialized, is a major American brand of bicycles and related products. It was founded in 1974 by Mike Sinyard and is based in Morgan Hill, California.
MyMiniFactory print (white) - Layer height 0.2mm, 0.8 shell thickness, 15% infill. This took 3 hours 51 minutes on Ultimaker 2 and used 44g of filament. Designers print (colourful) - This test print took 3 hours and 50 minutes, most likely extended due to the changing of filaments. I used PLA with a layer thickness of 0.3mm and the number of perimeter shells set to 0.In the final STL attached I have broadened some of the structure where the note/map slot is located, as this came out a bit thin in the test print. This can be seen in one of the attached photos
| Date published | 23/06/2014 |
| Time to do | 240 - 240 minutes |
| Material Quantity | 44g |
| Dimensions | 114 x 107 x 97mm |
| Complexity | Very Easy |
| Support Free | YES |
