Gorbo 2 tankoped
$3.00 Gorbo 2 tankoped
3D
Published 2017-04-21T10:02:40+00:00
Assembly video
ASSEMBLY INSTRUCTIONS: . Insert balls into sockets with side to side rocking action - pliers recommended. Some sanding might be required depending on your printer. My print in the pictures was printed at 0.2mm layer height.
Tankoped - a mech and tank combined - designed for infantry support.
Curvier than it's predecessor, completely redesigned legs, minor changes to the turret.
Details include: commanders cupola, gunner's periscope, driver's view port, main cannon, coaxial mg, gun mantle, leg greeblies, towing rings, exhaust and cooling vents.
Turret rotates 360°, cannon swivels up and down, legs are on ball joints.
Gorbo2 GUN_socket.STL -print 1x 20%infill
Gorbo2 HIP_armor.STL -print 2x 20%infill
Gorbo2 HIP_ring.STL -print 2x 20%infill
Gorbo2 HIP_socket.STL -print 2x 20%infill
Gorbo2 HULL.STL -print 1x 20%infill
Gorbo2 KNEE_socket.STL -print 2x 20%infill
Gorbo2 LEG_armor.STL -print 2x 20%infill, supports needed
Gorbo2 LEG_lower.STL -print 2x 20%infill
Gorbo2 LEG_upper_left.STL -print 1x 20%infill, supports needed
Gorbo2 LEG_upper_right.STL -print 1x 20%infill, supports needed
Gorbo2 TURRET_.STL -print 1x 20%infill
Gorbo2 BALL_base.STL -print 3x 40%infill
Gorbo2 FOOT.STL -print 2x 40%infill
Gorbo2 GUN_ball.STL -print 1x 20%infill
Gorbo2 GUN_barrel.STL -print 1x 20%infill
Gorbo2 GUN_mantle.STL -print 1x 20%infill
| Date published | 21/04/2017 |
| Price | $3.00 |
| Dimensions | 60mm x 60mm x 80mm |
| Technology | FDM |
| Complexity | Easy |