Spino a USB Organizer
Spino a USB Organizer
Published 2016-02-17T11:35:03+00:00
This is porcupine inspired USB organizer. It may hold 10 USB sticks. I needed an organizer and the ones I saw were one single line of USB and I wanted 2 lines of USB sticks, so I made my own.
I printed it on
Printer Brand: RepRap
Printer: Prusa I3
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2 mm
Infill: 10%
I found a pair of USB sticks organizer, but I wanted one that may hold 2 lines of stick. I have several types of USB sticks, so I measure all and got the biggest measure to make a generic big USB stick. From it I noted that if lean the stick 45 degrees I would like better. So when I lines 10 USB stick it reminded me of a porcupine. So I started building a body around the set of stick and later I extracted the USB stick from the body and refined some details.
There are some supports in the holds, but it is easy to clean and there is no risk to brake model. Enjoy your print.
Date published | 17/02/2016 |
Time to do | 283 - 487 minutes |
Material Quantity | 60g |
Dimensions | 65 x 110 x 18 mm |
Technology | FDM |