Red Hulk - Low Detail Series
15,838
views
746
downloads
9
collections
9 comments
Loading comments...
Red Hulk - Low Detail Series
3D
Published 2015-05-05T19:33:40+00:00
88
9
Add to Collection
Description
I did this low detail version only for 3d printing. This model is based on the comic book character created by Jeph Loeb and Ed McGuiness. Red Hulk was introduced in the Hulk series since january of 2008. In some issues is also called Rulk to distinguish from the original Hulk character.
According to his creators, Red Hulk is more aggressive, intelligent and has all the abilities of the original Hulk, however, he does not become stronger with anger, but rather by increasing levels of gamma radiation.
Printing Details
Print at 0.2 mm layer height, with 10% infill. This uses 94 g of filament and takes 15 hours and 57 minutes.
Technical Information
Date published | 05/05/2015 |
Time to do | 957 - 967 minutes |
Material Quantity | 94 g |
Dimensions | 111 mm x 112 mm x 150 mm |
Complexity | Medium |
More Information
Object Parts
Awesome Model. Might even print again on my Prusa Mk2 and paint it green or gray.