Ultimate Thor Series - Ultimate Mjolnir
Ultimate Thor Series - Ultimate Mjolnir
Published 2016-11-08T10:33:57+00:00
UltiNir - the Mjolnir Hammer from the Ultimate Thor Series.
Not printed yet, but checked 10 times if the Files are correct and fit each other.
Cutted for Printers with A4 / Letter Print Bed Size.
There are some Parts that you will need to complete the Build!
1: 60cm of a wooden Rod, 5cm thick.
This is for the Handle and the connection between the Center and the Handle Top.
For the Handle you need 50cm.
5,90cm long for the connection between the Handle Top and the Center Piece.
2: 2cm thick, 5cm long wooden rod for the Center Pieces to connect each other.
3: 3cm thick, 5cm long. For the Hammer Part 1 and 1-2 connection.
Before you glue them in, testfit them first!
That´s all!
support
Date published | 08/11/2016 |
Time to do | 180 - 360 minutes |
Material Quantity | 30 |
Dimensions | 45×97×213 |
Technology | FDM |