The Steam Rocket
The Steam Rocket
Published 2016-07-19T14:42:40+00:00
The Steam Rocket goes to Mars!
Steampunk inspired rocket. Detailed and very easy to print. You don't need rafts or supports.
It is divided in 5 parts to easily change printer settings, as some parts are more detailed than others. Special attention to 5_antenna, that have a very hard angle and it requires a slower print with at least 0,1mm to 0,12mm layer height.
Very easy to assemble, just follow the numbers from 1 (bottom) to 5 (top), with some glue.
I recommend:
0,25 noozle (so you can print and see all the details)
0,75mm to 1mm wall
0,1 to 0,15 layer height
10mm/s to 30mm/s print speed
For all parts except “5_antenna.stl” that needs a slower print (about 3mm/s to 5mm/s), maybe in some printers it can be useful a raft to hold the print in place.
I hope you have fun with it. If you paint it, show us a pic ;)
Date published | 19/07/2016 |
Time to do | - 1200 minutes |
Dimensions | 120x120x200 |
Technology | FDM |
Support Free | YES |
This was my make on this model sometime back. Really enjoyed the attention to detail in the model and it came out very nice. I printed at 0.04 resolution in Hatchbox Black PLA and painted in Folk Art Acrylics.