8.5mm Brushed Motor Test Stand
5,610
views
197
downloads
1
collection
0 comments
Loading comments...
8.5mm Brushed Motor Test Stand
3D
Published 2016-12-22T11:18:57+00:00
19
0
Add to Collection
Description
I designed this motor test stand for 8.5mm micro motors so I could determine which motor and propeller combo was best. This is an easy print as long as you use supports to hold up the slot that clamps on to the motor. I used an M3 screw to clamp the motor in place and a second M3 screw so that you can adjust the level of the arm on the scale. I hope these models are helpful to you! Cheers!
**The Motor Arm does require a very small section of support inbetween the gap for the motor clamp.**
Technical Information
Date published | 22/12/2016 |
Technology | FDM |
More Information
Object Parts