BIg Goron Sword (Ocarina of Time)
BIg Goron Sword (Ocarina of Time)
3D
Published 2015-05-13T16:24:38+00:00
Full Scale Big Goron Sword from the Legened of Zelda Ocarina of time! It is 5' 1" Long and is a really simple in its assembly. You will need a long 3/4" wooden dowel to slide through the center holes from your standard supply store. THis makes the sword far more durable and easy to swing without breaking. Handle sleeves are eliptical to aid in edge alignment when gripping so ensure they are facing the correct way. Glue peices once in aligned with one another and build up the stack using the dowel. Prints in 32 hours at high strength (1.2mm shell 0.2mm layer height) and under 24 hours at low strength (0.8 mm shell and 3% infill) Print with smaller layer heights for increased surface smoothness and ease of painting. Recommended to coat with epoxy resin for strength and surface smoothing.
See 'instruction' file inside zip folder.
| Date published | 13/05/2015 |
| Technology | FDM |
| Complexity | Difficult |