Click and drag to rotate
Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro) 3d printed Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro)

DIGITAL PREVIEW
Not a Photo

Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro)
Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro) 3d printed Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro)
Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro) 3d printed Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro)

DIGITAL PREVIEW
Not a Photo

Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro)

Made by
Not For Sale

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
For this gimbal you will need: 1/4", 1 foot long threaded rod to mount the camara on, 1/4" nuts to fix the threaded rod and to fix the counter weights at the bottom, 1/4" penny washers as a counter weight at the bottom, 4 624 ball bearings, 2 M4x16 screws to fix the horizontal bar inside the hand, 2 M4x2.2mm nuts for the M4x16 screws (low-profile, DIN 439), 1 M4x20 (or longer) screw (flat head) and nut to fix the hand to a pole or handle.
Details
What's in the box:
Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro)
Gimbal for a DIY 2-axis Steadicam (e.g. for GoPro)
Dimensions:
4 x 3.4 x 1.9 cm
Switch to inches
1.58 x 1.34 x 0.75 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.