Samsung A3 Car Holder

This is a car holder for Samsung A3 mobile phones. There are well-positioned openings to allow access to all connectors and function buttons of the model.

The clip was also designed to match the air extractors in my car.
Always check the compatibility of the clip with your car before assembling it on the stand. Modify the design / dimensions if necessary.
I recommend that you check that the clip is strong enough to support the holder with your phone, depending on how you position it in your own car, to avoid any risk of breakage or fall. I can not guarantee the robustness of this object as you make it yourself, with your own material, your own printer and your own settings. Finally, use a proper adhesive so that the clip and holder can not be separated during use.

If you have doubts about my object on any of these points, please modify the design accordingly or do not use it.

Finally I can not be held responsible for the use you can make of this object in your own car as well as its consequences. In any case, I strongly recommend that you position and use it in a way that will not disturb you while driving. Always give priority to your conduct and abide by the law! :)

Resolution 0.2mm
Maximum filling.
Rakes and supports required.

The finish of the support in horizontal position (such as on the file ... 6B.stl) is ok no more.
To see if the vertical position would not be better.