House Ratta: Buzz Saucer (18mm Scale)

Prints (0)

Description

SummaryHappy #3dprintingday! I just made it...whew! The House Ratta Buzz Saucer is a favorite of Xaot's Angels. Wildly unstable and difficult to pilot, it is also deadly and effective. The sound of 7 miniguns and 5 rotors give it it's name as it sends friend and foe alike to Xaot's judgement by making long strafing runs across the battlefield. It's propeller and gun turrets turn and the little stabilizer rotors pivot. I made it to further test Wayfarer Tactics's vehicle rules. We've set up a Patreon page for anyone who's interested to help fund us so we can keep making free and open sourced games like Wayfarer Tactics. Check it out here. Feel free to hack it! It's in pieces on TinkerCad here. Post pics if you do! Thank you for looking!Print SettingsPrinter Brand: MakerBotPrinter: MakerBot ReplicatorRafts: NoSupports: NoResolution: .2Infill: 15%Notes: I printed the split models with 3 shells and glued bits together with model glue. There is an error in the model: The main rotor shaft hole is off center. It get's covered up, so you can't see it when things get assembled, but it's there. Poop. Sorry all.

Design Files

File Size

buzz_saucer_body_bottom_fixed.stl
310 KB
buzz_saucer_body_top_fixed.stl
1.41 MB
buzz_saucer_end_caps_prop_gear_fixed.stl
510 KB
buzz_saucer_small_prop_1.stl
386 KB
buzz_saucer_prop_mandril_fixed.stl
28.8 KB
house_ratta_buzz_saucer_3dprintingday.stl
4.72 MB
buzz_saucer_base_fixed.stl
29.5 KB
buzz_saucer_gun_1.stl
173 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×