StarWars TieFighter - 250 Racer Style

NEW VERSION AVAILABLE: https://pinshape.com/items/36248-3d-printed-starwars-tiefighter-gen2

This winter allmost everyone seems to be in the StarWars fever - so am I! On Christmas I decided to do an Imperial Tie Fighter! Like the common 250 Racer I wanted to use the same components. 

You can find a little video about the project on YouTube under the following link: https://youtu.be/QK5DBfn9214

And that's it. Here it is, my version of the Tie Fighter. In an kind of Racer-Style... 8-) 

I'm using the following stuff: 

1x CC3D with Spektrum Sat-Receiver 

4x DYS 20A 4x T-Motor 2204 

4x 6045 Bullnose Props 1x Tattu 4S 1550mAh 

some LED's 

But there is also an 1806 Version - it flies with the lighter winglets on 3S... The whole project is still in development...

EDIT 30.01.2016

Added the 3S TieBody (Koerper Oben 3S / Koerper Unten 3S). It works with an 3S 1300mAh, Flytime is about 3 Minutes with the 1806 Motors on 6". It needs the lighter 3S Winglets...

EDIT 08.06.2017

NEW VERSION AVAILABLE: https://pinshape.com/items/36248-3d-printed-starwars-tiefighter-gen2