Designed by
steyrc
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
PRINTING INSTRUCTIONS: . Insert balls into sockets with side to side rocking action - pliers recommended. Some sanding might be required depending on your printer. 0.2mm layer height.
- Amelix LEG_armor_upper_front.STL -print 2x 20%infill, supports needed
- Amelix LEG_armor_upper_back.STL -print 2x 20%infill, supports needed
- Amelix LEG_armor_lower_front.STL -print 2x 20%infill, supports needed
- Amelix LEG_armor_lower_back.STL -print 2x 20%infill, supports needed
- Amelix LEG.STL -print 2x 20%infill, supports included in the model
- Amelix HULL.STL -print 1x 20%infill
- Amelix HIP.STL -print 2x 40%infill
- Amelix GUN.STL -print 1x 20%infill
- Amelix FOOT.STL -print 2x 40%infill
- Amelix TURRET_ring.STL -print 1x 20%infill
- Amelix TURRET_ball.STL -print 1x 40%infill
- Amelix TURRET.STL -print 1x 20%infill, supports included in the model
- Amelix SOCKET.STL -print 5x 20%infill
Design Files
File Size
Amelix TURRET.STL
1.38 MB
Amelix TURRET_ball.STL
158 KB
Amelix TURRET_ring.STL
911 KB
Amelix FOOT.STL
490 KB
Amelix GUN.STL
378 KB
Amelix HIP.STL
393 KB
Amelix HULL.STL
1.72 MB
Amelix LEG.STL
272 KB
Amelix LEG_armor_lower_back.STL
519 KB
Amelix LEG_armor_lower_front.STL
495 KB
Amelix LEG_armor_upper_back.STL
105 KB
Amelix LEG_armor_upper_front.STL
109 KB
Amelix SOCKET.STL
228 KB
Comments