Knife-shaped Key Holder

Prints (0)

Description

There are two versions of the key holder.

The first version is for up to nine keys and the second version is for up to five keys.

Parts for version one :

  • 1x key holder_1.stl , 1 x key holder_2.stl , 2x standoff_9 keys.stl , 1x locking disc_9 keys.stl , 1x keychain.stl and spacer.stl to prevent the rattle if less than nine keys are installed (For example 2 spacer if you only have seven keys). 3x M3x20  countersink screw (DIN 965) , 3x M3 locknut , 1x M3 washer.

Parts for version two :

  • 1x key holder_1.stl , 1 x key holder_2.stl , 2x standoff_5 keys.stl , 1x locking disc_5 keys.stl , 1x keychain.stl and spacer.stl if needed (For example 2 spacer if you only have seven keys). 3x M3x14  countersink screw (DIN 965) , 3x M3 locknut , 1x M3 washer.

The part key holder_1.stl needs support. I printed key holder_1.stl and key holder_2.stl with HDglass from Formfutura and 0,175 Layer height, for the standoff and the locking disc I used ApolloX from from Formfutura but you can also use ABS.

Video 1

Video 2

Design Files

File Size

key holder_2.stl
230 KB
keychain.stl
63.4 KB
locking disc_5 keys.stl
169 KB
locking disc_9 keys.stl
185 KB
spacer.stl
69 KB
standoff_5 keys.stl
53.7 KB
standoff_9 keys.stl
60 KB
key holder_1.stl
245 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×