Designed by
Tom_Neverwinter
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
SummaryMODEL BY: ABB ELITEN http://www.therpf.com/f78/my-mk-42-build-new-stl-files-upper-arm-section-166141/ all I did was cut it up and into nice 4inch parts, I take no credit for anything else on these parts.
Design Files
File Size
Topvent_-_CATIA_STL__Cut_1_.stl
311 KB
Innerlayer__Cut_4_.stl
199 KB
Bicep__Cut_3_.stl
378 KB
Innerlayer__Cut_8_.stl
233 KB
Bicepdetail.stl
581 KB
Innerlayer__Cut_11_.stl
110 KB
Innerlayer__Cut_10_.stl
16.1 KB
Innerlayer__Cut_9_.stl
73.7 KB
Innerlayer__Cut_5_.stl
276 KB
Innerlayer__Cut_2_.stl
468 KB
Bicep__Cut_1_.stl
349 KB
Innerlayer__Cut_1_.stl
463 KB
Back__Cut_12_.stl
287 KB
Back__Cut_11_.stl
253 KB
Back__Cut_4_.stl
260 KB
Back__Cut_6_.stl
386 KB
Bicep__Cut_2_.stl
327 KB
Back__Cut_8_.stl
131 KB
Back__Cut_10_.stl
67 KB
Back__Cut_2_.stl
135 KB
Back__Cut_1_.stl
136 KB
Back__Cut_7_.stl
132 KB
Back__Cut_5_.stl
387 KB
Back__Cut_9_.stl
103 KB
Back__Cut_3_.stl
263 KB
Innerlayer__Cut_6_.stl
263 KB
Innerlayer__Cut_3_.stl
200 KB
Bicep__Cut_4_.stl
377 KB
Innerlayer__Cut_7_.stl
238 KB
Topvent_-_CATIA_STL__Cut_2_.stl
346 KB
Comments