Designed by
George Xib
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Printing of the transmitter tray including attached STL is optimized to 3D printer, with the size of pad – bed (x,y) min. 200x200mm.
The weight of the assembled tray is not higher than 250 g. (Infill percentage = 13-15%, primary layer hight = 0,2 mm.)
Design Files
File Size
03_TT FS i6 or TGY i6 UpLeft3.stl
1.3 MB
04_TT FS i6 or TGY i6 UpRight4.stl
1.02 MB
05_TT FS i6 or TGY i6 center5.stl
265 KB
06_TT FS i6 or TGY i6 1x pin 20x10xdiag.stl
181 KB
07_TT FS i6 or TGY i6 longHolder.stl
288 KB
08_TT FS i6 or TGY i6 normalHolder.stl
262 KB
09_TT FS i6 or TGY i6 turn shortHolder.stl
263 KB
10_TT FS i6 or TGY i6 midlleHolder.stl
277 KB
Manual Transmitter Tray Flysky i6 or Turnigy i6 to print in 3D_EN.pdf
1.67 MB
Manual Transmitter Tray Flysky i6 or Turnigy i6 to print in 3D_CZ.pdf
1.67 MB
01_TT FS i6 or TGY i6 DownLeft1.stl
704 KB
02_TT FS i6 or TGY i6 DownRight2.stl
848 KB
03A Bonus big_hands TT FS TGY i6 UpLeft3.stl
1.36 MB
04A Bonus big_hands TT FS TGY i6 UpRight4.stl
1.2 MB
11_TT FS i6 or TGY i6 pin 60x10x4.stl
218 KB
Comments