CS GO: Tec 9 (Functional Parts)

Prints (0)

Description

The terrorist tec 9 from CS GO.  Made to have a working chamber and removable magazine. 4 quarter inch magnets are needed for the magazine and a half inch spring about 3 inches long is needed for the chamber. 

WARNING: Handle carefully to make sure others know it is a prop and not real

Assembly:

Pieces 1, 2, and 3 form one half and 4, 5, and 6 form the other. Put 1 magnet in the hole at the bottom of each half. Place the chamber into the cylindrical slot of the second half along with the spring. Glue on the first half, placing the protrusion of the chamber through the slot. Add the cover to the chamber protrusion. Put 2 magnets into the hole of the magazine and push it into the magazine slot of the gun. 

Design Files

File Size

Tec 9 Clip Cover.STL
136 KB
Tec 9 Part 5.STL
237 KB
Tec 9 Part 1.STL
857 KB
Tec 9 Part 3.STL
702 KB
Tec 9 Part 2.STL
262 KB
Tec 9 Chamber.STL
30.6 KB
Tec 9 Part 6.STL
247 KB
Tec 9 Part 4.STL
400 KB
Tec 9 Clip .STL
20.4 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×