MobBob V2 Remix - Smart Phone Controlled Robot

Prints (0)

Description

[Update 20151231] Adding Photos Add 18650_Battery_Bank_2x_r01.stl Add 18650_Battery_Bank_2x_Cover_swC_r01.stl

Smart Phone Controlled Robot - MobBob V2 Remix

3D Design Tool: SketchUp Pro Design concept: RAPIRO - The Humanoid Robot [http://www.thingiverse.com/thing:309466] This is an remix version of my MobBob robot. MobBob is a smart phone controlled robot. By harnessing the power of your smart phone, MobBob is a walking, talking robot with voice recognition and computer vision that you can build for around $30. I will be continuing to extend his features over time. I want MobBob to be a companion robot that everyone can afford and have fun with. You can see videos of MobBob V2 Remix in action here:

..... Coming soon!! The main aims of the V2 remix were to: Support standard 9g servos [previously I was using Tower Pro SG90 servos] Make everything easier to assemble [no more need for glue] Make it easier to adapt/modify for other phones. The new bracket system made it easier to exchange a new phone / the battery holder. Also, in my V2 Remix build, I'm also using the Arduino Nano instead of the DIY Nano shield, so the entire build is smaller and tidier. :) MobBob V2 Remix uses the same software as the original MobBob V2. You can find the latest Arduino code here: https://github.com/cevinius/Mo... You can download the latest version of the Android app from Google Play - it is free, ad-free, and without IAP: https://play.google.com/store/... You can find more detailed build and wiring instructions here: ...coming soon... The parts that you need to print:

  • 1 x Leg Left
  • 1 x Leg Right
  • 1 x Foot Left
  • 1 x Foot Right
  • 1 x Foot Cover Left
  • 1 x Foot Cover Right
  • 1 x Waist
  • 1 x Arduino Nano Holder
  • 1 x Phone Mount Base
  • 2 x Phone Mount Side
  • 1 x Phone Mount Gear
  • 1 x Phone Mount Back Plate
  • 1 x Phone Mount Conn
  • 2 x Phone Mount Bolt
  • 2 x Phone Mount Nut
  • 1 x Battery Bank Rack [18650 x 2]

The non-3D printed parts you need are:

  • 4 x Tower Pro SG90 servos
  • 1 x Arduino Nano [see note below]
  • 1 x HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module
  • 1 x 5V Micro USB 1A Lithium Battery Charging Board [see note below]
  • 1 x DC-DC Converter Step Up Boost Module 2-5V to 5V 1.2A
  • 1 x Rectangle On/Off Long Rocker Switch SPST
  • 2 x Snap-In Single 'A'-'AA' Battery Contacts 209 [KEYSTONE ELECTRONICS CORP.]
  • 2 x Snap-In Single 'A'-'AA' Battery Contacts 228 [KEYSTONE ELECTRONICS CORP.]
  • 2 x 18650 Lithium ion Batteries
  • 1 x USB 2.0 A Male to Micro USB B 5pin + Mini B Male Y Splitter Cable
  • 1 x Smart Phone [see note below]
  • 4 x M3 5mm [for Foot Cover]
  • 2 x M2 10mm [for Phone Connect]
  • 4 x M2 5mm [for Phone Mount Back Plate]
  • 2 x 2mm 5mm Tapping screw [for Foot servos]
  • 2 x 2mm 8mm Tapping screw [for Hip servos]
  • 2 x 1mm 5mm Tapping screw [for Foot servos hone]
  • 2 x 1mm 8mm Tapping screw [for Hip servos hone]

[Note: I got the servos, Arduino Nano, Bluetooth Module and Battery for under $30.]

Arduino Nano:

This is a small, Arduino compatible board with DIY extension board. MobBob V2 app connects to the Bluetooth module using its Bluetooth LE service. The app to support other Bluetooth cards.

Battery Extender:

You can use other batteries that provide 5V with a steady current. If you use other batteries, you may need to adapt the battery rack for your battery's size.

Use 18650 Lithium Battery Charging Board With Protection Charger Module and Step Up Boost Module 3.7V to 5V for Smart Phone

http://www.thingiverse.com/thi...

Smart Phone:

You can use other Android Smart Phones with This app.

You do not need to adapt the size of the phone holder for your phone. The app has been successfully tested with Nexus and Samsung, LG phones, but should work on other Android phones.

Instructions:

Print all the required parts

Get all the non-3D printed parts

Assemble as per the photos - I'll be writing some more detailed instructions on my website soon!

Install the Arduino code from the GitHub link in the description - You will need to update the Arduino pins in the code to match yours, and probably update the centering values for the servos.

Install the Android app from the link in the description.

Have fun!

If you hit any problems, please post a question on this website: www.cevinius.com, here, or on YouTube channel. A few people have built MobBobs now, so there are people around who can help.

Coming soon update!!

Print Settings

  • Printer: PANDORA DXs - DIY 3D Printer
  • Slicer: Cura 15.04.2
  • Layer height (mm): 0.1
  • Shell thickness (mm): 0.8
  • Bottom/Top thickness (mm): 1.6
  • Fill Density (%): 00
  • Print speed (mm/s): 50
  • Print temperature: 200
  • Bed temperature: 70
  • Support type:
    • Touching buildplate:
      • MobBob2_Remix_Phone_Mount_Side.stl,
      • MobBob2_Remix_Phone_Mount_Nut_L.stl,
      • MobBob2_Remix_Phone_Mount_Nut_R.stl,
      • MobBob2_Remix_Phone_Mount_Conn.stl,
      • 18650_Battery_Bank_2x_Cover_swC_r01.stl
    • Everywhere:Everywhere:
      • MobBob2_Remix_Nano_Shield_Holder.stl
      • MobBob2_Remix_Battery_Mount_Cover.stl
      • MobBob2_Remix_Jacket_L.stl
      • MobBob2_Remix_Jacket_R.stl

    • MobBob2_Remix_Nano_Shield_Holder.stl MobBob2_Remix_Battery_Mount_Cover.stl MobBob2_Remix_Jacket_L.stl MobBob2_Remix_Jacket_R.stl
    • Platform adhesion type: Brim
    • Filament: PLA
    • Filament Diameter (mm): 1.75

    Zalophus's DesignHouse: http://zalophus.tistory.com/ and https://zddh.blogspot.com/

    Design Files

    File Size

    MobBob2_Remix_Foot_L_Cover.stl
    41.6 KB
    MobBob2_Remix_Foot_L_Bottom.stl
    70.4 KB
    MobBob2_Remix_Foot_R_Bottom.stl
    70.4 KB
    MobBob2_Remix_Foot_R_Cover.stl
    41.5 KB
    MobBob2_Remix_Leg_L.stl
    67.8 KB
    MobBob2_Remix_Leg_R.stl
    67.8 KB
    MobBob2_Remix_Waist.stl
    68.1 KB
    MobBob2_Remix_Nano_Shield_Holder.stl
    74.6 KB
    MobBob2_Remix_Phone_Mount_Base.stl
    55.9 KB
    MobBob2_Remix_Phone_Mount_Conn.stl
    31.9 KB
    MobBob2_Remix_Phone_Mount_Side.stl
    39.1 KB
    MobBob2_Remix_Phone_Mount_Gear.stl
    83.3 KB
    MobBob2_Remix_Phone_Mount_Back_Plate.stl
    30.6 KB
    MobBob2_Remix_Phone_Mount_Nut_L.stl
    173 KB
    MobBob2_Remix_Phone_Mount_Bolt_L.stl
    156 KB
    MobBob2_Remix_Phone_Mount_Nut_R.stl
    172 KB
    18650_Battery_Bank_2x_Cover_swC_r01.stl
    36.5 KB
    18650_Battery_Bank_2x_r01.stl
    118 KB
    MobBob2_Remix_Phone_Mount_Bolt_R.stl
    156 KB

    Comments

    Your browser is out-of-date!

    Update your browser to view this website correctly. Update my browser now

    ×