Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
SummaryMy partner's sister in law is almost fanatical about Captain America so I made a small shield to demonstrate the power of 3D printing. What: A small shield modelled after that used by Captain America.Print SettingsPrinter: ZYYX+Rafts: Doesn't MatterSupports: NoResolution: 0.12Infill: 0.1Notes: Print using Simplify3D sequential printing model with all model origins aligned. Each model is printed using a different process and tool/filament changes to enable multi-coloured printing with a single nozzle.
Be sure to disable the print obstruction detection if printing on ZYXX+: --> Go to “Utilities” on the ZYYX-> Scroll to “Total trig. Time(s)”-> Set Value to “0″.How I Designed ThisThe main model is designed and then colours are added as a seperate layer to 0.4mm depth.
Comments