Tenkeyless (TKL) Keyboard Tray

Prints (0)

Description

Summary I made this keyboard tray to complement my HID Relay USB Keyboard->Bluetooth Keyboard mod. It was designed to fit my TeamWolf Zhuque+, but should accomodate any keyboard up to 350mm wide by 117mm deep with the cable centered from the back. Probably nobody else needs such a niche item, but I thought I'd share anyway. If you're more interested in the USB->Bluetooth adapter, check out my videos on how it works and build instructions here: https://www.youtube.com/playlist?list=PLVfmdw6Y3COp4Via7KergjVs8i194ffJS Print Settings Printer Brand: Deezmaker Printer: Bukito Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 10-20 Notes: If you want to print the split version, print the tab and slot test files first to test the separation tolerance and tweak your slicer/print settings if needed. The split parts are designed to fit on my Bukito's 140x150mm print bed. You need support under the tabs. I printed with only 10% infill, 3 perimeters, and 3 layers top/bottom. You'll probably want a denser infill and/or more top layers to avoid some holes that I got around the inside walls where the keyboard sits. The keyboard will be covering it up, but if that still bugs you adjust settings accordingly.

Design Files

File Size

Tray_Front_Mid_Right.stl
28.4 KB
Tray_Front_Left.stl
35.6 KB
Tray_Back_Left.stl
39 KB
Tray_Back_Mid.stl
35.2 KB
Tray_Back_Right.stl
39.2 KB
TabTest.stl
6.14 KB
SlotTest.stl
5.75 KB
Tray_Front_Mid_Left.stl
28 KB
Tray_Front_Right.stl
36.3 KB
Complete_Solid_Tray.stl
59.5 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×