E3D Hotend Mount with z-probe mount and cooling fan for ORDbot H

Prints (0)

Description

SummaryThe layer cooling fan was designed for the ORDbot Hadron machine but could be used on any machine with a flat mounting plate. For the hinge pins use a section of 1.75mm filament.Print SettingsPrinter: ORD Bot HadronRafts: NoSupports: YesResolution: 0.2Infill: 50%Notes: designed for use with E3D hot end, LJ12A3-4-Z/BX Inductive Proximity Sensor. Hardware: 2x #6-32 Square Nuts. 2x #6-32 x 3/4" SHCS. Mounting: 2x M4 X 8 SHCS. For the layer cooling fan duct I just uses some two sided sticky tape and that works fine.

Design Files

File Size

duct_layer_cooling-1.stl
271 KB
e3d_hinge-1.stl
60.4 KB
e3d_z-probe_clamp.stl
41.5 KB
e3d_single_w_z-probe.stl
176 KB
duct_layer_cooling-2.stl
19.8 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×