Japanese Fish Scale iPhone 6/s Case

Prints (0)

Description

I used a Japanese fish scale design to create an artistic print for the iPhone 6/s. It was inspired by my love of Japanese art and I hope you enjoy the design as I did creating it.

Note: I recommend increasing the infill settings at 100% to increase the strength of the iPhone case.

My Configurations Settings: (may vary since these are my settings )

Slicer: MatterControl

Printer: Wanhao Duplicator I3

infill setting: 100%

Layer Height: 0.1mm (0.2mm look looks okay as well.)

Raft: Yes (but not recommended)

Print ETA Time: 4 Hours 22 Minutes

HeatBed: yes (not recommended )

Sanding: Yes (if you are using PLA & ABS)

--- Support 3D Creator ---

If you would like to help me create more cool things and remake stuff, or buy me coffee that would fuel my creativity to do so, you can by clicking here

Design Files

File Size

fish_scale_iphone_6s_case.stl
2.42 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×