Designed by
steyrc
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Legs are on ball joints, turret rotates, gun moves up and down, sideskirts move as well.
PRINTING INSTRUCTIONS: . Insert balls into sockets with side to side rocking action - pliers recommended. Some sanding might be required depending on your printer. 0.2mm layer height.
- Gerzer3 LEG_armor_front.STL -print 4x 20%infill
- Gerzer3 LEG_armor_back.STL -print 4x 20%infill
- Gerzer3 LEG_3.STL -print 2x 20%infill
- Gerzer3 LEG_2.STL -print 2x 20%infill
- Gerzer3 HULL.STL -print 1x 20%infill
- Gerzer3 TURRET_socket.STL -print 1x 20%infill
- Gerzer3 TURRET_gun.STL -print 1x 20%infill
- Gerzer3 TURRET_ball.STL -print 1x 40%infill
- Gerzer3 TURRET.STL -print 1x 20%infill
- Gerzer3 SKIRT_right.STL -print 2x 20%infill, supports needed
- Gerzer3 SKIRT_left.STL -print 2x 20%infill, supports needed
- Gerzer3 SKIRT_holder_right.STL -print 1x 40%infill
- Gerzer3 SKIRT_holder_left.STL -print 1x 40%infill
- Gerzer3 LEG_knee.STL -print 1x 20%infill
- Gerzer3 LEG_foot.STL -print 2x 40%infill
Design Files
File Size
Gerzer3 LEG_2.STL
207 KB
Gerzer3 LEG_3.STL
208 KB
Gerzer3 LEG_armor_back.STL
20 KB
Gerzer3 LEG_armor_front.STL
46.3 KB
Gerzer3 LEG_foot.STL
104 KB
Gerzer3 LEG_knee.STL
126 KB
Gerzer3 SKIRT_holder_left.STL
133 KB
Gerzer3 SKIRT_holder_right.STL
133 KB
Gerzer3 SKIRT_left.STL
19.7 KB
Gerzer3 SKIRT_right.STL
19.7 KB
Gerzer3 TURRET.STL
122 KB
Gerzer3 TURRET_ball.STL
175 KB
Gerzer3 TURRET_gun.STL
38.1 KB
Gerzer3 TURRET_socket.STL
93.4 KB
Gerzer3 HULL.STL
87.9 KB
Comments