Chinese Smoke Design - iPhone 6/s Case

Prints (0)

Description

I used a Chinese Cloud Pattern that I found on a silk shirt to create an artistic print for the iPhone 6/s. 

Note: I recommend increasing the infill settings at 100% to increase the strength of the iPhone case.

-----My Configurations Settings-----

Slicer: MatterControl

Printer: Wanhao Duplicator I3

infill setting: 100%

Layer Height: 0.1mm (0.2mm look looks okay as well.)

Raft: Yes (but not recommended)

Print ETA Time: 4 Hours 22 Minutes

HeatBed: yes (not recommended )

Sanding: Yes (if you are using PLA & ABS)

Printer Speed: 40mm/s (I recommend something slower so that the curves extrude correctly and accurately )

--- Support 3D Creator ---

If you would like to help me create more cool things and remake stuff, or buy me coffee that would fuel my creativity to do so, you can by clicking here

Design Files

File Size

chinese_smoke_design_-_iphone_6s_case.stl
1.34 MB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×