Slimline Utility blade holder

Prints (-1)

Description

SummaryScale: 1:1 in Inches Update: If you are having problems with the one piece design Get: 07 slim blade rev 3 Front - Print 1 07 slim blade rev 3 Back - Print 1 07 slim blade rev 3 Pin - Print 2 I want a Rexford Knives RUT (Rexford Utility Tool) but I am unwilling to spend $150 on one. I looked at it and boiled it down to the features I want. Which are: 1) Hold and lock a Utility blade in a safe way 2) Small 3) A hole for a length of paracord 4) Easy to use I went through 3 revisions: Rev 1 Too thin, hard to get the blade out Rev 2 Good thickness but the blade is hard to get out and the lock doesn't always work well Rev 3 Good thickness, blade stays in, bigger window for easier access to the bladeHow I Designed This3 Revisions. I went through 3 revisions: Rev 1 Too thin, hard to get the blade out Rev 2 Good thickness but the blade is hard to get out and the lock doesn't always work well Rev 3 Good thickness, blade stays in, bigger window for easier access to the blade

Design Files

File Size

07_slim_blade_rev_3_pin.stl
6.72 KB
07_slim_bladeREV_3.stl
59.2 KB
07_slim_bladeREV_2.stl
64.9 KB
07_slim_blade_rev_3_Split.stl
83.2 KB
07_slim_bladeREV1.stl
49.7 KB
07_slim_blade_rev_3_Back.stl
25.6 KB
07_slim_blade_rev_3_Front.stl
58.1 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×