Easy Hex Thermoform Bracelet

Prints (2)

Description

This simple bracelet prints as a flat string of hexagons in less than 12 minutes. Boil some water while you're waiting and then heat and bend the print into a bracelet that custom-fits your wrist!

Sizes from XS to XL are included; each differs only by the number of hexagons in the model.

The idea for designing a bracelet that you heat and bend after printing was inspired by the bracer instructions in Gyrobot's fantastic Flexy-Finger Prothesis model.

It only takes a minute to shape the bracelet after printing:

Add very hot water to a container and then submerge the bracelet strip.

Poke the strip a bit with a fork and you'll find that it is very flexible and soft after just a couple of seconds.

Pull the strip out with the fork and immediately form it into a rough curve. (The water will be hot but the bracelet cools very quickly.)

To refine the shape, dip parts of the bracelet back into the hot water and then bend them into shape.

=====

Twitter:  twitter.com/mathgrrl

Hacktastic blog:  www.mathgrrl.com/hacktastic

Shapeways geekhaus store:  www.shapeways.com/shops/mathgr... 

This design and all associated pictures and files are licensed under the Creative Commons Attribution Non-Commercial Share Alike license. If you want to use designs, images, or files outside of the terms of this license, please email [email protected].

Design Files

File Size

thermoform_hex_09XS.stl
61 KB
thermoform_hex_12L.stl
81.5 KB
thermoform_hex_11M.stl
74.7 KB
thermoform_hex_10S.stl
67.9 KB
thermoform_hex_13XL.stl
88.2 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×