Doll's House // Toy Shelves with Recycled CD Cases.

Prints (0)

Description

Doll House // Toy Shelves using recycled CD Cases

Have you ever wondered what to do with all those CD cases laying around the house? Why not turn them into something useful? With a few simple 3D printed pieces (designed with FreeCAD) we can make a doll house or shelving units for toys. The sky’s the limit! You can use the 3D printed pieces to make all sorts of configurations. Plus you can use paper printouts (placing them inside the CD case where the CD cover was) to personalize your doll house or toy shelves.

I have designed 6 standard pieces, you can print them out individually if you’d like, the files I have supplied are prepared to be printed out in groups thus speeding up the process.

The pieces are:

--> 8L_2T.STL (8 L y 2 T) --> 2T_2X.STL (2 T y 2 X) --> 2X_60_2X-60.STL (2 X60 y -X60) For the V shaped roof.

Assembly is simple and doesn’t require any glue nor tape. Keep symmetry in mind when joining the pieces and make sure to leave the empty gap (left after removing the black plastic) facing outward on either side but never towards the front nor back of the structure as this would affect its stability.

For more info please check out my video:

https://www.youtube.com/watch?v=1P9rTkH_7uo 

https://www.youtube.com/watch?v=wNeygHErDeE

Casas de muñecas o estanterias para juguetes con cajas de CDs recicladas:

Seguro que aun tenemos cantidad de cajas de CD por casa, con unas simples piezas de 3D diseñadas en FreeCAD vamos a poder darles una segunda vida, reciclándolas en estantalaras para juguetes o en una casa para muñecas. Como un diseño modular tenemos cientos de configuraciones distintas, y al poder personalizar las carátulas, horas de diversión aseguradas.

Inicialmente disponemos de 6 piezas que nos permiten ensamblar las cajas (L T I X X60 -X60), están pensadas para un impresión rápida y económica; aunque podemos imprimirlas de una en una, he preparado unos ficheros con grupos de piezas para agilizar el proceso:

--> 8L_2T.STL (8 L y 2 T) --> 8T_2X.STL (8 T y 2 X) --> 2X_60_2X-60.STL (2 X60 y -X60) Para el tejado en V.

La construcción es muy sencilla, tan solo tenemos que prestar atención a mantener la simetría y que la parte hueca de la caja de CD quede a una lado en la parte inferior o exterior, es importante dejar lo huecos en los lados para conseguir una buena consistencia de la construcción sin tener que añadir, pegamentos o cinta adhesiva.

Para más informacion ver video.

https://www.youtube.com/watch?v=1P9rTkH_7uo 

https://www.youtube.com/watch?v=wNeygHErDeE

Design Files

File Size

galile0_Cd.jpg
1.72 MB
2T_2X.STL
16.5 KB
8L_2T.STL
30.9 KB
T.STL
3.79 KB
X.stl
4.57 KB
L.stl
3.01 KB
2X_60_2X-60.stl
19.6 KB
X_60.stl
4.96 KB
I.stl
1.84 KB
X_60_mirror.stl
4.96 KB
6T_2I.STL
25.9 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×