Designed by
JRClem
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
This is a 3D printed bowtie! It's designed to be segmented. This way it can be joined by string and flex, plus you can print it in different colors.
You can check out how I assembled it in this video.
Print Settings
- Printer: Monoprice Maker Select
- Rafts: No
- Supports: Yes
- Resolution: 0.2mm
- Infill: 20-30%
Notes: Most pieces don't need support if printed with the flat side down. I do however recommend supports for the innermost segment of the bow part.
Post-Printing Glue the center sections and thread each lobe to it one at a time using fishing line or stretchy jewelry string. Finally, Glue the clip if you want to wear it as a bowtie or don't if you want to glue it as something else. Check out the video for more details!
Design Files
File Size
bowtie_clip.stl
10 KB
bow_v2_color2.stl
219 KB
bowCenter_v2_color2.stl
211 KB
bowtie_v2_color1.stl
499 KB
bowtie_whole.stl
930 KB
Comments