Automatic Plant Water-er - Self Watering Plant Bulb

SummaryI designed this part to water my plants automatically. Print vertically, I used supports on the exterior (none on interior, removed with Simplify3D). Can be scaled for small or large plants. Just fill, quickly turn upside down while inserting into the soil.Print SettingsPrinter: PowerSpec Dual ProRafts: NoSupports: YesResolution: 0.3Infill: 15Notes: Make sure you manually remove the supports that are generated inside the bulb, or you will not be able to get them out after it is printed. ZenWorks Clear ABS & Inland Orange ABS Printed on glass with ABS Slurry Nozzle: 0.4mm Retraction: 1.25mm Layer: 0.3mm Top & Bottom layers: 3 Outlines: 2 Skirt: 2 layer, 10 outlines, 0mm offset Infill: 15% Rectilinear Support: External auto generated (manually remove internal) Nozzle Temperature:230C Bed Temperature: 100C Print Speed: 2200 mm/min Movement Speed: 4000 mm/minPost-PrintingOptional - Acetone SmoothingI use acetone to smooth the part and ensure a liquid tight seal. It also helps make it look more like glass.