EUMakers Xmas Ball
EUMakers Xmas Ball
Published 2017-02-23T14:42:04+00:00
Xmas Ball consists in a two part big Christmas ball.
It is very easy to assemble, and permits two color combinations.
After printing the two halves, all you have to do, is pass a thread through them and make a knot at the ends.
Then, it will be ready to be hanged as a window decoration.
Designed by Helder Santos
IN CASE YOU HAVE SOME DIFFICULTIES IN PRINTING THE "Xmas_Ball.stl" FILE, YOU CAN TRY USING "Xmas_Ball_Rotated.stl" FILE INSTEAD.
SLICE ENGINE - CURA 15.04.2
EXTRUDER TEP | 213ºC
COOLING | 0-10%
BASIC TAB
Layer Height | 0.20 mm
Shell Thickness | 0.8 mm
Enable Retraction | On
Bottom/Top Thickness | 0.8 mm
Fill Density | 100%
Print Speed | 50 mm/s
Support Type | NO
Platform Adhesion Type | BRIM - Brim Line Amount | 5
ADVANCED TAB
Nozzle Size | 0.4 mm
Initial Layer Thickness | 0.3 mm
Travel Speed | 250 mm/s
Bottom Layers Speed | 20 mm/s
Infill Speed | 50 mm/s
Top/Bottom Speed | 25 mm/s
Outer Shell speed | 40 mm/s
Inner Shell Speed | 50 mm/s
Minimal Layer Time | 5 mm/s
Enable Cooling Fan | OFF
RETRACTION
Minimal Travel | 1.5 mm
Minimal Extrusion Before Retracting | 0.02 mm
Z Hop When Retracting | 0 mm
Retracting Length | 6.0 mm
Retracting Speed | 45 mm/s
Date published | 23/02/2017 |
Technology | FDM |