iPhone 6/6S Case Articuno (pokemon) for PLA,ABS and flexible (ninjaflex) material

Good News for Pokemon fans!

Because of the PokemonGO popularity me and my brother made an Articuno (team blue) iPhone 6/6S case for myself and for my friends.

The case was designed by my brother who is a graphic designer, thats why the back of the case is unique and fit with the style of articuno but it still protects the whole phone.

We made 2 version of it 1 for normal material (PLA,ABS) and 1 for flexible material (I printed it in ninjaflex cheetah).

At the testing phase I printed some for me and my friends to fix the smaller problems.
We redesigned the cases more than 20 times and the result we got a case that perfectly fit, protect very well, and comfortable to use (doesn't cut your finger in a long-term use).

If you buy the pack you both get the normal version and the flexible version for your iPhone.

In case of big interest we will also make Zapdos (team yellow) and Moltres (team red).

Impresora: Ultimaker 2
Versión normal:
Diámetro de la boquilla: 0,4 mm
Material: PLA (el ABS también debe ser bueno)
Extremo caliente: 215 C
Altura de la capa: 0,15 mm
Grosor de la pared: 0,8 mm
Velocidad: 35mm / s
Infill: 40% (no importa mucho)
Soporte: off
Tamaño: 100% está bien para iPhone 6, para iPhone 6S aumento de 0,5% para el ajuste perfecto

Versión flexible :
Diámetro de la boquilla: 0,4 mm (probablemente 0,6 mm o 0,8 mm)
Material: Ninjaflex guepardo (también probado con ninjaflex semiflex, ninjaflex, Flexifil PLA)
Altura de la capa: 0,15 mm
Extremo caliente: 225 C
Altura de la capa: 0,25 mm (a esta altura el lado se vuelve realmente suave y agradable, a una altura más baja como 0,15 mm obtendrá una superficie más mate)
Grosor de la pared: 0,8 mm
Velocidad: 40mm / s
Infill: 40% (no importa mucho)
Soporte: on
Tamaño: 100%