Aller au contenu

Unité d'eau tourbillonnaire - Buse d'eau Vortex - Vortex Process Technology (VPT)

Publicité
?
Qualité de la création : 4,9/5 (4 votes)
Évaluation des membres sur l’imprimabilité, l’utilité, les détails, etc.

  • 26,9k vues
  • 72 j’aimes
  • 805 téléchargements
  • 2 collections

Licence
Format du design 3D
STL Détails du dossier Fermer
  • SWU_17x9mm_Magnet_hole-plug.stl
  • SWU_3pcs17x9_magnet_hole-plug_ring.stl
  • SWU_6pcs17x9_magnet_hole-plug_ring.stl
  • SWU_top_3-4inch_3xM6arms_up.stl

En savoir plus sur les formats

Dernière mise à jour 2015-10-09 à 18h59
Date de publication 2015-06-26 à 20h05
Numéro du design 2574

Info sur le fichier 3D

Description du modèle 3D

3D printed nozzle with magnets, creating Vortex water, to restructure the water molecules and thus vitalizing the water? Is it actually working? I don't know but there´s lots of info out there claiming so. I designed this nozzle to raise the awareness for our urgent need for pure water on this planet. If this design works... great fun! If you start thinking about how you can contribute in some way... OUTSTANDING :-)

The information collected here is for educational and entertainment purposes only. It is not
to be considered medical advice, prescriptive or diagnostic. See your physician for
qualified health care. And I do not claim that this design will work in any special way.

I was inspired by the work of many great inventors and researchers like for instance:
Viktor Schauberger https://en.wikipedia.org/wiki/Viktor_Schauberger
Johann Grander https://de.wikipedia.org/wiki/Johann_Grander

Why did it get my attention? Well lots of people claim that the water structure is very important. Like for instance: http://www.fractalfield.com/implodermagneticresearch/LukaszImploderResults.jpg
http://stud.epsilon.slu.se/5243/1/vagnell_m_130130.pdf
http://www.life-sources.com/pdf/lsi_magnetized.pdf
Also included some interesting youtube videos below.

So I designed this vortex nozzle to be 3D printed... Now anyone can download, 3D print and test if the alleged benefits of "living water" are true or not... (if this design is working that is...)

Made 1/2 inch + 3/4 inch threaded parts so that you can use most adapters and hose connectors (for instance 1/2"-M22x1 for the tap).

Versions with holes can be used for rods/M6 rods as tripod stands in ponds/barrels etc. Alternatively threaded pipes etc can hold the unit directly.

Also possible to add magnets to test restructuring of the water. Perhaps water "remembers" toxins etc and acts like it still is in the water even if filtered out by carbon filters etc. Imagine what that does to the drinking water that circulates back to the tap from the sewers.
Magnets might restructure (reset) the "water molecule clusters" since the H2O molecule has a negative and a positive side. Lots of people are doing research and it looks like the industry successfully uses water treatment that suggests that it´s a fact...
(I will test these magnets: http://www.magnordic.se/shop/gummi-magneter-17x9-7624p.html )

I print without support and do not care about the fact that the parts are not 100% watertight due to the FDM method.
Consider using a FDA-approved material.

If it´s printed in rubber-like material it will perhaps survive running in the pond over winter?

the longer funnel prefer lower flow since the spin is higher.

Use the files in any way you like :)

https://youtu.be/XfldWIJkr9k
http://youtu.be/3OpL7qyBEOU
http://youtu.be/EitsTTiSZis
http://youtu.be/V9mOYgAoyz8
http://youtu.be/WBHBvAgL5Is
http://youtu.be/HHMOVKvhkXI
https://youtu.be/h4sj2ypN2ks
https://youtu.be/M7tZicHsl0o

Some interesting info:
https://youtu.be/59iuelCL0MQ
https://youtu.be/8FnxlpuKc8U
https://youtu.be/tbYy09FR1Lk
https://youtu.be/QSFPYLq74PQ
https://youtu.be/PDW9Lqj8hmc

Publicité


Page traduite par traduction automatique. Voir la version originale.
Vous rencontrez un souci avec ce design ? Signaler un problème.

Publicité

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 3 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 4 solutions accessibles à tous :

  • PUBLICITÉ : Désactivez votre bloqueur de publicité (AdBlock, …) et cliquez sur nos bannières publicitaires.

  • AFFILIATION : Réalisez vos achats en ligne en cliquant sur nos liens affiliés ici Amazon.

  • DON : Si vous voulez, vous avez la possibilité de nous faire un don via Ko-Fi 💜.

  • BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !


Partager et télécharger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communauté des makers ! Et non celles des géants de l’impression 3D ou du software qui possèdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intérêts commerciaux.

Cults3D est un site indépendant et autofinancé qui n’a de compte à rendre à aucun investisseur ou aucune marque. La quasi totalité des revenus du site sont reversés aux makers de la plateforme. Les contenus publiés sur le site servent uniquement les intérêts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrôler le marché de la modélisation 3D.

Paiement 100% sécurisé par carte bancaire, PayPal, Apple Pay, Google Pay, etc.
Voir toutes les solutions de paiement.