2016 Suzuki GSX-RR 1:8 Racing RC MotoGP Version2

Prints (0)

Description

By: Brett Turnage

www.bti3dlabs.com

@3dprintRaceTech

Version 2 

This is a brand new motorcycle. It builds upon the knowledge gained with my previous bikes, but where those were a proof of concept, this is the final product. 

This 1/8 size Racing Motorcycle is far more advanced and has been completely redesigned with knowledge gained from actual RC motorcycle designers and racing enthusiasts whose invaluable input was incorporated into the design. This is not meant to be a good 3d printed RC motorcycle, but a serious new RC Motorcycle variant that people can build, design and race at the track.

NOT JUST BIGGER, BUT BETTER—COMPLETELY REENGINEERED AND REDESINGED!!

Every part of the bike has been redesigned, and re-imagined to make this bike stronger, more robust, more realistic, to make this RC motorcycle drive, lean, and use rubber tires. 

1/8 SIZE

Building this bike to an industry standard size allows the use of off the shelf parts, dampers, shocks, wheels, and tires.

MORE REALISTIC!

Different color combinations that mimic the rear Suzuki race bike livrey.

CHOOSE YOUR RIDER

You have two choices of number plates #25 (Maverick Viñales) and #41 (Alex Villà), so you get to decide who you want to represent!

REDESIGNED BODY

The body was redesigned to make the bottom of the bike narrower to allow maximum lean.

DESIGNED TO BALANCE 

All of the weight is tucked in towards the center of the bike to allow it to easily balance. 

BOLTS NOT GLUE

Unlike my other 3d vehicles, this bike relies on bolts rather than glue. This makes the bike easier to build and maintain, and it aids in the bikes strength.

BUILT IN THREADS

Fusion360 gave me the ability to add threads to the design so the holes print with holes already tapped. (cleaning up the treads with a tap is still recommended)

ROBUSTNESS

This bike was built with crashing in mind. Parts are bigger and the body parts are one piece so it can withstand crashing and rolling over.

INNOVATIVE CHASSIS

This new bikes has a chassis that the body parts bolt onto just like a real bike. The bike can be broken down to the chassis in less than 5 minutes by only removing 9 bolts. This allows easy maintenance, tuning, and testing.

55MM REAR ADUSTABLE SHOCK

Bigger rear shock for better dampening.

ADJUSTABLE GEOMETRY

You can adjust the ride height, steering angle, rear shock ride height, rear shock mounting position, front fork angle, and even the camber of the rear wheel.

METAL RACING FRONT DAMPNER

Racing front dampers are used in the front forks because this bike was meant to use serious racing parts.

WIDE SELECTION OF RUBBER TIRES AND WHEELS

The last bikes suffered in the lack of available rubber motorcycle tires, not this bike… any 1/8 tire or rim will fit and can be used. From 3d printed rims with Kyosho rubber Tires, to GPV-1 tires, to even GRP’s carbon rims and super sticky tires. The bike can be configured in with a regular rear rim or even use a mechanical gyro in the rear if you are new to driving an RC motorcycle.

Weight 770 grams/1.7 pounds

Version 2 Chassis Manual

Version 2 Chassis Manual 

Instructables Manual

Parts List 

Rider Assembly

All files have been updated to Version 2 6/30/1

Design Files

File Size

Front Tire insert.stl
1.61 MB
red bottom.stl
134 KB
GRP Front Tire hub.stl
741 KB
rim face.stl
141 KB
12.34mm spacer.stl
127 KB
handle bar (left).stl
158 KB
vertebrae.stl
60 KB
SteeringLinkServoMount (Devastator).stl
831 KB
thigh (left)(outer) (blue)(2).stl
117 KB
suzuki lettering (white) (S left).stl
118 KB
suzuki lettering (white) (left Z).stl
48.5 KB
spindle (left).stl
109 KB
servo holder (67.2 degrees).stl
201 KB
servo holder (62.2 degrees).stl
201 KB
main body (yellow)(right) .stl
7.26 MB
lower arm (right).stl
524 KB
front fender (yellow)(left).stl
147 KB
rear Tire insert.stl
847 KB
body frame (left).stl
753 KB
body frame (right).stl
773 KB
standoff (right front).stl
921 KB
front hub (new).stl
1.36 MB
rear wheel spacer 10mm.stl
136 KB
rear wheel hub (GRP).stl
724 KB
triple tree top.stl
1.16 MB
hip bone (right) .stl
66.7 KB
hip bone (left).stl
62.4 KB
thigh (left)(outer) (blue)(1).stl
762 KB
1.stl
139 KB
2.stl
133 KB
thigh (right)(inner) .stl
507 KB
suzuki lettering (white) (right) (K).stl
33.8 KB
suzuki lettering (K)(1)(left).stl
11.5 KB
front (fairing #25) blue.stl
1.03 MB
foot pegs (left).stl
43.3 KB
rear fender top (yellow).stl
131 KB
main body (blue top) (right).stl
12.8 MB
rear seat pad.stl
17.1 KB
front fender (yellow)(right).stl
148 KB
suzuki lettering (K)(2)(left).stl
16 KB
suzuki lettering (u)(1) (right).stl
11.7 KB

Comments

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×