Designed by
Stam Technologies
Prints (0)
-
No Prints Yet
Be the first to upload a Print for this Design!
Description
Print (1) Sanding Block Top and (1) Sanding Block Base at a .3mm layer height, next print (2) Sanding Block Bolt and (2) Sanding Block Twist Nut at a .1mm layer height
Instructions: The Bolts go up through the holes in the Base. Place Top on the Base (it only fits one way). Finally tighten both Nuts on the two Bolts (You may need to use pliers the first few tries).
Design Files
File Size
Sanding Block Top.stl
167 KB
Sanding Block Base.stl
94.1 KB
Sanding Block Bolt.stl
1.21 MB
Sanding Block Nut.stl
847 KB
Comments