Fairy Light Pumpkin
Fairy Light Pumpkin
3D
Published 2014-10-07T15:28:26+00:00
This is a Halloween inspired fun decoration. In the download there are 3 pumpin designs a large pumpkin, shown in the photos, a smaller version of this and an even smaller one , especially designed to slip over fairy lights. All pumpkins come with bottom inserts which cover the bootom and lock in the lights.
This is also designed to go along with the scooby themed Arduino project which can be found here,http://www.myminifactory.com/object/2796.
In this Arduino project the pumpkin acts as an obstecle, the car needs tobe programmed to avoid the pumpkin and guide Scooby and the crew to safety.
The larger pumpkin is lit by placing a small 3V battery in the slot provided, then 2 LEDs are slid over the top of the LED, making sure the longer leg of the LED is on the positive side of the battery. The smaller pumpkin can be put over one or two fairy lights. Finally the fairy light pumpkin is especially designed to be easily slid over individual fairy lights. The dimensions are given for the largest of the pumpkins
| Date published | 07/10/2014 |
| Time to do | 240 - 287 minutes |
| Material Quantity | 78g |
| Dimensions | 97mm x97mm x70mm |
| Complexity | Easy |