Cepe light

#DAGOCULTS

If you download this model or if you like it, please put a "j'aime" :)

Here is a command that was made to me and with which I had a lot of fun! The idea was simple: make a cep that can light up in different colors and that is UNIQUE!
So I share the 3D files; The hat and the foot of the mushroom are in two different models in order to be able to print them in large size. The third file is the axis on which comes an LED strip, which will be covered by the mushroom.

The components to be purchased can be found at www.gearbest.com.
You will need an LED strip that you can find by typing this reference on the site: 190162602 for a price of 5.23 €. You will also be able to find the same type of LED strip in supermarkets but for a price higher than 20 euros.
This LED strip has an input with switch, control box, and USB output. You can therefore connect it to the mains using a telephone charger socket.
Alternatively, you can order it on gearbest by typing "Cool Power Adapter Usb Usb Charger Ue" in the search bar. (5.43 €)
Delivery times are 2 weeks on average.

After printing the 3 files:
Glue the foot and the hat of the mushroom with a strong Loctite adhesive.
Wind the LED strip around the axis with the adhesive on the back of the LED strip. If your mushrooms are printed on a small scale, the adhesive may not adhere properly. I therefore advise to wrap a fishing line around the LED strip, it itself wound on the axis.
You can now close your new lamp by placing the mushroom on the shaft, placing 2 glue points on the base.

Printing speed: 50mm / s
Inner shell: 3
Outside shell: 3
Layer height: 0.14
Temperature (PLA): 190 ° C
Filling: 15%
Support activated (hat)
Brim activated