Nightstand lamp - Nightstand lamp

Separable into pieces lamp, to be printed in standard 3d printer, all pieces are joined by thread mechanisms (except for the sphere which is joined by pressing). It has a total height of 37cms. The light socket housing has a M10x1 thread compatible with commercial light sockets (contact me if you need any custom thread).

Separable lamp in pieces, to be printed in standard 3d printer, all the pieces are joined by screw mechanisms (except for the sphere that is joined by pressure). It has a total height of 37cms. The housing for the lamp holder has a thread type M10x1 compatible with commercial lamp holders (contact me if you need a particular thread).

0.22 layer height, 1.2mm perimeter and 15% infill. No supports needed. I reccomend to print the base with 80% to 100% infill to provide weight. Also you can add some rubber material to the base, to give it adherence. I provided an .stl file for you to print the rubber base if your printer supports TPU or FLEX materials, if not you can use any other rubber material.

0.22 layer height, 1.2 mm perimeter and 15% infill. No backing is required. I recommend printing the base with 80% to 100% infill to give it weight and stability. You can also add some anti-slip material to the base. I have provided a .stl file so you can print the rubber base if your printer supports TPU or FLEX materials, otherwise you can use any other material like eva or rubber.