Skip to content

Endor Bundle Diorama - Landing Pad, Deflector Shield and Bunker

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.9k views
  • 15 likes
  • 8 downloads
  • 2 collections
License
3D design format
PDF and STL Folder details Close
  • Assembly instructions for Endor Diorama.pdf
  • Bunker-Back walls A.stl
  • Bunker-Back walls B.stl
  • Bunker-Back walls C.stl
  • Bunker-Back walls D.stl
  • Bunker-Blast Door - Left.stl
  • Bunker-Blast Door - right.stl
  • Bunker-Blast door guide left.stl
  • Bunker-Blast door guide right.stl
  • Bunker-Bunker Roof cut 1.stl
  • Bunker-Bunker Roof cut 2.stl
  • Bunker-Bunker Roof cut 3.stl
  • Bunker-Bunker Roof cut 4.stl
  • Bunker-Bunker Roof cut 5.stl
  • Bunker-Bunker Roof cut 6.stl
  • Bunker-Bunker Roof uncut.stl
  • Bunker-Conduits x8.stl
  • Bunker-Door way sidewall Left.stl
  • Bunker-Door way sidewall right.stl
  • Bunker-Front walls left.stl
  • Bunker-Front walls right.stl
  • Bunker-Left walls a.stl
  • Bunker-Left walls b.stl
  • Bunker-Right walls a.stl
  • Bunker-Right walls b.stl
  • Bunker-base cut 1.stl
  • Bunker-base cut 2.stl
  • Bunker-base cut 3.stl
  • Bunker-base cut 4.stl
  • Bunker-base uncut.stl
  • Bunker-door frame exterior.stl
  • Bunker-interior blaster door walls Left.stl
  • Bunker-interior blaster door walls Right.stl
  • Bunker-interior detail 1.stl
  • Deflector shield-5mm dowel 2.stl
  • Deflector shield-5mm dowel 3.stl
  • Deflector shield-5mm dowel.stl
  • Deflector shield-Antenna 1 - 10mm Dowel 500mm length.stl
  • Deflector shield-Antenna Base.stl
  • Deflector shield-Antenna Support 1.stl
  • Deflector shield-Antenna Support 2.stl
  • Deflector shield-Antenna Support 3.stl
  • Deflector shield-Antenna Support ring a.stl
  • Deflector shield-Antenna Support ring b.stl
  • Deflector shield-Deflector Shield pt1.stl
  • Deflector shield-Deflector Shield pt2.stl
  • Deflector shield-Deflector Shield pt3.stl
  • Deflector shield-Deflector Shield pt4.stl
  • Deflector shield-Dish 1.stl
  • Deflector shield-Dish 10.stl
  • Deflector shield-Dish 11.stl
  • Deflector shield-Dish 12.stl
  • Deflector shield-Dish 13.stl
  • Deflector shield-Dish 14.stl
  • Deflector shield-Dish 15.stl
  • Deflector shield-Dish 16.stl
  • Deflector shield-Dish 2.stl
  • Deflector shield-Dish 3.stl
  • Deflector shield-Dish 4.stl
  • Deflector shield-Dish 5.stl
  • Deflector shield-Dish 6.stl
  • Deflector shield-Dish 7.stl
  • Deflector shield-Dish 8.stl
  • Deflector shield-Dish 9.stl
  • Deflector shield-Dish Antenna 1 Mid body.stl
  • Deflector shield-Dish Antenna 1 top.stl
  • Deflector shield-Dish Antenna array 2a.stl
  • Deflector shield-Dish Antenna array 2b.stl
  • Deflector shield-Dish center collar.stl
  • Deflector shield-Dish center spire base.stl
  • Deflector shield-Dish ring 2 pt1.stl
  • Deflector shield-Dish ring 2 pt10.stl
  • Deflector shield-Dish ring 2 pt11.stl
  • Deflector shield-Dish ring 2 pt12.stl
  • Deflector shield-Dish ring 2 pt13.stl
  • Deflector shield-Dish ring 2 pt14.stl
  • Deflector shield-Dish ring 2 pt15.stl
  • Deflector shield-Dish ring 2 pt16.stl
  • Deflector shield-Dish ring 2 pt2.stl
  • Deflector shield-Dish ring 2 pt3.stl
  • Deflector shield-Dish ring 2 pt4.stl
  • Deflector shield-Dish ring 2 pt5.stl
  • Deflector shield-Dish ring 2 pt6.stl
  • Deflector shield-Dish ring 2 pt7.stl
  • Deflector shield-Dish ring 2 pt8.stl
  • Deflector shield-Dish ring 2 pt9.stl
  • Deflector shield-Dish ring 3 pt1.stl
  • Deflector shield-Dish ring 3 pt10.stl
  • Deflector shield-Dish ring 3 pt11.stl
  • Deflector shield-Dish ring 3 pt12.stl
  • Deflector shield-Dish ring 3 pt13.stl
  • Deflector shield-Dish ring 3 pt14.stl
  • Deflector shield-Dish ring 3 pt15.stl
  • Deflector shield-Dish ring 3 pt16.stl
  • Deflector shield-Dish ring 3 pt2.stl
  • Deflector shield-Dish ring 3 pt3.stl
  • Deflector shield-Dish ring 3 pt4.stl
  • Deflector shield-Dish ring 3 pt5.stl
  • Deflector shield-Dish ring 3 pt6.stl
  • Deflector shield-Dish ring 3 pt7.stl
  • Deflector shield-Dish ring 3 pt8.stl
  • Deflector shield-Dish ring 3 pt9.stl
  • Deflector shield-Main antenna Base ring.stl
  • Deflector shield-deflector column 2 x4.stl
  • Deflector shield-deflector column 6a.stl
  • Deflector shield-deflector column 6b.stl
  • Deflector shield-deflector column base 1.stl
  • Deflector shield-perimeter sat base.stl
  • Deflector shield-perimeter sat dish.stl
  • Deflector shield-perimeter sat joint.stl
  • Deflector shield-perimeter sat ring mount.stl
  • Landing.pad-2nd tier detail.stl
  • Landing.pad-850x1900mm platform 3:8 plywood.stl
  • Landing.pad-Base foot 2.stl
  • Landing.pad-Base foot 3.stl
  • Landing.pad-Base foot 4.stl
  • Landing.pad-Column 1.stl
  • Landing.pad-Column 2.stl
  • Landing.pad-Column 3 curve roof 1.stl
  • Landing.pad-Column 3.stl
  • Landing.pad-Column 4 spotlight 1.stl
  • Landing.pad-Column 4 support 1.stl
  • Landing.pad-Column 4 support 2.stl
  • Landing.pad-Column 4 support 3.stl
  • Landing.pad-Column 4 support 4.stl
  • Landing.pad-Column 4.stl
  • Landing.pad-Column spliter.stl
  • Landing.pad-Gangway 1.stl
  • Landing.pad-Gangway roof top 1.stl
  • Landing.pad-Landing.pad-Column 1.stl
  • Landing.pad-Light Frame top.stl
  • Landing.pad-Light Pad frame 3.stl
  • Landing.pad-Light pad Base merged.stl
  • Landing.pad-Light pad Base.stl
  • Landing.pad-Light pad Light top.stl
  • Landing.pad-Light pad frame 1.stl
  • Landing.pad-Light pad frame 2.stl
  • Landing.pad-Light pad frame 4.stl
  • Landing.pad-Middle Gangway Bridge merged.stl
  • Landing.pad-Middle Gangway bridge Gangway 1.stl
  • Landing.pad-Middle Gangway bridge Railing 1.stl
  • Landing.pad-Middle Gangway bridge Railing 2.stl
  • Landing.pad-Middle Gangway bridge roof 1.stl
  • Landing.pad-Middle Gangway bridge roof top.stl
  • Landing.pad-Pad frame 1.stl
  • Landing.pad-Pad frame 10.stl
  • Landing.pad-Pad frame 11.stl
  • Landing.pad-Pad frame 12.stl
  • Landing.pad-Pad frame 13.stl
  • Landing.pad-Pad frame 14.stl
  • Landing.pad-Pad frame 15.stl
  • Landing.pad-Pad frame 16.stl
  • Landing.pad-Pad frame 17.stl
  • Landing.pad-Pad frame 18.stl
  • Landing.pad-Pad frame 19.stl
  • Landing.pad-Pad frame 2.stl
  • Landing.pad-Pad frame 20.stl
  • Landing.pad-Pad frame 21.stl
  • Landing.pad-Pad frame 22.stl
  • Landing.pad-Pad frame 23.stl
  • Landing.pad-Pad frame 24.stl
  • Landing.pad-Pad frame 3.stl
  • Landing.pad-Pad frame 4.stl
  • Landing.pad-Pad frame 5.stl
  • Landing.pad-Pad frame 6.stl
  • Landing.pad-Pad frame 7.stl
  • Landing.pad-Pad frame 8.stl
  • Landing.pad-Pad frame 9.stl
  • Landing.pad-Railing 1.stl
  • Landing.pad-Railing 2.stl
  • Landing.pad-Round Catwalk 1.stl
  • Landing.pad-Tower mergerd.stl
  • Landing.pad-base foot 1.stl
  • Landing.pad-curve Hand rail.stl
  • Landing.pad-curve post 1.stl
  • Landing.pad-curve post 2.stl
  • Landing.pad-curve post 3.stl
  • Landing.pad-curve post 4.stl
  • Landing.pad-gangway all merged.stl
  • Landing.pad-gangway roof 1.stl
  • Landing.pad-ganway light.stl

Learn more about the formats
Last update 2023-10-02 at 01:46
Publication date 2022-09-01 at 21:38
Design number 828402
modelA3d

modelA3d

3D printer file info

3D model description

Fan art inspired by Star Wars Return of the Jedi this is a diorama of the Landing Pad, Deflector Shield and Bunker. This is a BIG diorama for you fans out there that will take any table top game to a whole new level. (Note: Imperial Shuttle NOT included)

Designed with 3.75" in mind the Landing Pad has full towers and lighting details. The pad itself (850mm x 1900mm) is built by you using a 3/8 sheet plywood. Pad size will fit the Kenner Imperial Shuttle or other similar sized models. Allowances have been made to add LED lighting. Height is 800mm tall allowing for the Kenner AT-AT to line up with the Gangways and make the Luke Skywalker meets Darth Vader scene.

Deflector Shield
Total Height is approx 2000mm to the top of the spire. Allowances made for LED lighting.

Bunker
This is a detailed bunker like no other with inside detail showing the conduits and top of the star corridor when you open the blast doors.
Blast doors have been made with slots to open and close.

You cannot resell this design in any shape or form.

3D printing settings

All Parts can be printed in FDM.
All parts can fit on

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.