Skip to content

1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop

1:1 SNIPEX ALLIGATOR 14.5mm ANTI-MATERIEL RIFLE 2 METRES LONG! a Pe 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
Snipex1.jpeg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
Snipex2.jpeg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
Muzzle.jpeg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
02.jpg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
03.jpg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
04.jpg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
05.jpg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
06.jpg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop
07.jpg 1:1 Snipex Alligator 14.5mm Anti-Materiel Rifle Prop

πŸ”« 3D models of guns or weapons are dummy objects or prop toys and have no real functionality as weapons. They are intended for entertainment or decorative purposes only. For any design violating our T&Cs, please report them.

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 6.5k views
  • 20 likes
  • 6 downloads
License
3D design format
PDF and ZIP Folder details Close
  • Parts.zip
    • Alligator Parts/14.5mm Round.stl
    • Alligator Parts/Barrel-Part 1.stl
    • Alligator Parts/Barrel-Part 2.stl
    • Alligator Parts/Barrel-Part 3.stl
    • Alligator Parts/Barrel-Part 4.stl
    • Alligator Parts/Barrel-Part 5.stl
    • Alligator Parts/Barrel-Part 6.stl
    • Alligator Parts/Barrel-Part 7.stl
    • Alligator Parts/Barrel-Part 8.stl
    • Alligator Parts/Bipod Pad (Print 2).stl
    • Alligator Parts/Bipod-Part 1 (Print 2).stl
    • Alligator Parts/Bipod-Part 2 (Print 2).stl
    • Alligator Parts/Bipod-Part 3 (Print 2).stl
    • Alligator Parts/Bipod-Part 4 Print 2).stl
    • Alligator Parts/Bolt Handle.stl
    • Alligator Parts/Bolt-Part 1.stl
    • Alligator Parts/Bolt-Part 2.stl
    • Alligator Parts/Buttstock Pad.stl
    • Alligator Parts/Buttstock-Part 1.stl
    • Alligator Parts/Buttstock-Part 2.stl
    • Alligator Parts/Buttstock-Part 3.stl
    • Alligator Parts/Buttstock-Part 4.stl
    • Alligator Parts/C-Clip.stl
    • Alligator Parts/Cap1 (Print12) .stl
    • Alligator Parts/Cap2 (Print 4).stl
    • Alligator Parts/Cap3.stl
    • Alligator Parts/Carry Handle Screw Set.stl
    • Alligator Parts/Carry Handle-Part 1.stl
    • Alligator Parts/Carry Handle-Part 2.stl
    • Alligator Parts/Carry Handle-Part 3.stl
    • Alligator Parts/Cheek Rest Latch (Print 2).stl
    • Alligator Parts/Cheek Rest Lift-Part 1.stl
    • Alligator Parts/Cheek Rest Lift-Part 2.stl
    • Alligator Parts/Cheek Rest Lift-Part 3.stl
    • Alligator Parts/Cheek Rest Pad.stl
    • Alligator Parts/Cheek Rest-Part 1.stl
    • Alligator Parts/Extractor.stl
    • Alligator Parts/Grip.stl
    • Alligator Parts/Hex Screw Head (Print22).stl
    • Alligator Parts/Magazien Latch Lever-Part 1.stl
    • Alligator Parts/Magazine Latch Guide.stl
    • Alligator Parts/Magazine Latch Lever-Part 2.stl
    • Alligator Parts/Magazine Latch.stl
    • Alligator Parts/Magazine Well Button (Print 2).stl
    • Alligator Parts/Magazine Well Plate (Print 2).stl
    • Alligator Parts/Magazine Well-Part 1.stl
    • Alligator Parts/Magazine Well-Part 2.stl
    • Alligator Parts/Magazine Well-Part 3.stl
    • Alligator Parts/Magazine-Part 1.stl
    • Alligator Parts/Magazine-Part 2.stl
    • Alligator Parts/Magazine-Part 4.stl
    • Alligator Parts/Magazine-Part 5.stl
    • Alligator Parts/Magazine-Part 6.stl
    • Alligator Parts/Muzzle-Left.stl
    • Alligator Parts/Muzzle-Right.stl
    • Alligator Parts/Picatinny Rail Plate.stl
    • Alligator Parts/Picatinny Rail-Part 1.stl
    • Alligator Parts/Picatinny Rail-Part 2.stl
    • Alligator Parts/Picatinny Rail-Part 3.stl
    • Alligator Parts/Picatinny Rail-Part 4.stl
    • Alligator Parts/Rear Lift Bar.stl
    • Alligator Parts/Rear Lift Pad.stl
    • Alligator Parts/Rear Lift Turnbuckle.stl
    • Alligator Parts/Rear Lift-Lower Screw.stl
    • Alligator Parts/Rear Lift-Upper Screw.stl
    • Alligator Parts/Receiver Bottom-Part 1.stl
    • Alligator Parts/Receiver Bottom-Part 2.stl
    • Alligator Parts/Receiver-Part 1.stl
    • Alligator Parts/Receiver-Part 2.stl
    • Alligator Parts/Receiver-Part 3.stl
    • Alligator Parts/Receiver-Part 4.stl
    • Alligator Parts/Sleeve (Print 2).stl
    • Alligator Parts/Trigger Housing.stl
    • Alligator Parts/Trigger Stop.stl
    • Alligator Parts/Trigger.stl
    • Scope Parts/Knob1.stl
    • Scope Parts/Knob2.stl
    • Scope Parts/Knob3.stl
    • Scope Parts/Scope Mount-Part 1.stl
    • Scope Parts/Scope Mount-Part 2.stl
    • Scope Parts/Scope Mount-Part 3.stl
    • Scope Parts/Scope Mount-Part 4.stl
    • Scope Parts/Scope-Part 1.stl
    • Scope Parts/Scope-Part 2.stl
    • Scope Parts/Scope-Part 3.stl
    • Scope Parts/Scope-Part 4.stl
    • Scope Parts/Scope-Part 5.stl
    • Scope Parts/Scope-Part 7.stl
    • Scope Parts/Scope-Part 8.stl
    • Scope Parts/Scope Mount-Part 5.stl
    • Scope Parts/Scope Mount-Part 6.stl
  • Snipex Alligator Assembly Instructions.pdf

Learn more about the formats
Last update 2023-02-10 at 03:09
Publication date 2022-09-04 at 02:58
Design number 830366
TazMan2000

TazMan2000

3D printer file info

3D model description

Ukrainian made by Snipex part of the XADO Corporation and adopted by the Ukrainian Armed Forces. You will need sandpaper, files, drill bits and taps if you want to make this the most realistic as possible. This is not a print and put together gun. This is a higly accurate printed replica, however some accommodations have to be made to allow for 3D printing. Look over the instructions before printing and assembling. You will need a 1" and a 1/2" copper plumbing pipes (sized to North American standards) as well as some brass rods and pipe stock. The lengths are in the instructions.

This model has many movable features, such and a repositionable cheek rest that raises and lowers, a rear armature that raises and lowers, a removable scope that sits on an accurate Picatinny Rail, functional bipod legs, movable trigger and a functional carry handle.

This is for experienced modellers and has many parts. The model is designed to be disassembled into 2 pieces for storage.

The bolt actually loads rounds from the magazine into the chamber, but I haven't perfected the extraction mechanism.
If you have ideas, I'm open to hearing them.

I used Tamiya TS-3 Dark Yellow for the main body. The Rustoleum Chalked Cocoa Bean turned out to be way to light, so you may want to choose something less brilliant.

This is a prop. NOT A FIREARM. It cannot be made into a real weapon. An airsoft or paintball conversion may be possible, however this was not initially designed for that purpose.

3D printing settings

Print this at at least 0.2mm layer height and 4 wall thicknesses.

There are some parts that would benefit to be printed on a resin printer.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.