2 x 120mm fan adapter for MSI GeForce RTX 2080 Super Ventus XS

The 1st downloadable file (Graphics card adapter) is easily printable, and you will only need 8 fan screws, and the screws that came with the graphics card that hold the fan shroud on.

To replace the original fan shroud, you first need to attach 2 x 120mm fans to the 3d printed shroud, when done, look up a tutorial on how to remove the original fan shroud on the graphics card, when removed, put in the 3d printed shroud using the 4 tabs and screw it in with the screws that hold the original fan shroud on, and plug in the fans via the motherboard headers, NOT on the graphics card itself.

The 2nd & 3rd downloadable file (Graphics card adapter for small printer 1 & 2) is easily printable, and you will need 4 x M3 bolts of any length (Just more than 1,3cm should do it), 4 x M3 nuts, 8 x fan screws and the screws that came with the graphics card that hold the fan shroud on.

To replace the original fan shroud, you first need to assemble the 2 printed parts with the 4 M3 bolts, by pushing them into the 4 holes on the first printed part, then into the 4 holes on the second printed part, then screwing the nuts onto the 4 bolts to securely assemble the 2 pieces.

Then, attach 2 x 120mm fans to the assembled 2 printed parts, when done, look up a tutorial on how to remove the original fan shroud on the graphics card, when removed, put in the 3d printed shroud using the 4 tabs and screw it in with the screws that hold the original fan shroud on, and plug in the fans via the motherboard headers, NOT on the graphics card itself.

Feel free to contact me if you are having problems with my instructions.

-