Pill Box/Bottle/TPU

Pill box or bottle to store whatever suits you best, soft so that it does not rub you and difficult to be opened by accident in pockets, bags... you will not lose the contents!

Designed to be printed on TPU, and offer the user instant satisfaction upon opening.

I hope you enjoy it and find it as useful as I did :)

Pill box or bottle to keep whatever you need, soft so it won't rub you and difficult to be opened by accident in pockets, bags... you won't lose the content!

Designed to be printed on TPU, and offer the user instant satisfaction when opening it.

I hope you enjoy it and find it as useful as I do :)

PRINTER MODEL: Creality Ender3 without structural or hardware modifications, this will affect some of the parameters below, especially if the printers are different. Or if you prefer your own settings, in case they work better for you, feel free to share them.

NOZZLE: 0.6

LAYER HEIGHT: 0.3

WALL THICKNESS: 1.2

MATERIAL: TPU (amzbscs in this case)

TEMPERATURE: nozzle 225, bed 60 (I'm looking for good adhesion between layers to achieve the highest possible tightness).

SPEEDS MM/S: print 40, wall 20, first layer 20, offset 100.

RETRACTION: YES 3mm at 25mm/s, before wall: NO, Z-jump: NO.

WITHOUT SUPPORTS

TRY PRINTING FROM INSIDE OUT: gives better results and ensures a good print. If not, that's OK, this one is printed from the outside to the inside.

PRINTING TIME: approx. 50 minutes.

PRINTER MODEL: Creality Ender3 without structural or hardware modifications, this will affect some of the parameters below, especially if the printers are different. Or if you prefer your own settings, in case they work better for you, feel free to share them.

NOZZLE: 0.6

LAYER HEIGHT: 0.3

WALL THICKNESS: 1.2

MATERIAL: TPU (amzbscs in this case)

TEMPERATURE: nozzle 225, bed 60 (I'm looking for good adhesion between layers to maximize airtightness)

SPEEDS MM/S: print 40, wall 20, first layer 20, displacement 100.

RETRACTION: YES 3mm at 25mm/s, before wall: NO, Z-jump: NO

NO SUPPORTS

ATTEMPT TO PRINT FROM INSIDE TO OUTSIDE: gives better results and ensures a good print. If not, that's OK, this one is printed from the outside to the inside.

PRINTING TIME: about 50 minutes