MSR_Guardian Adapter

The adapter for the MSR was born out of the need to also filter water for colleagues and friends during a tour to replenish stocks. With the adapter, filtering into ordinary bottles has become very user-friendly, because you only have to worry about pumping. There are optional lids to go with the adapter itself to keep it clean and protected.

The adapter is designed so that a kind of funnel protrudes inside the bottle, so no water, when pumping, can escape through the thread. In addition, the adapter also corresponds externally to the design language of the MSR and thus represents an ideal matching accessory.

It is simply convenient if you want to prepare more water in one place times and the associated container is missing at all or is already full. Bottles with PET thread are available practically everywhere. With the adapter, the functional radius is expanded, in my opinion, an absolute must for every MSR Guardian owner.

I have printed here with default settings on my Ender 3 S1... :)

So with the usual 0.4 Nozzle and the layer thickness of 0.2. I used 3 wall lines, 15% fill (zigzag). Support or support structure is activated (Normal-Concentric).

Nevertheless, please take care of the correct alignment and settings in the slicer yourself.

For the material, I used plain PLA.... Have fun with it.