Planet Eclipse EMF100 UNW P90 MAG PLUG

the UNW P90 mags are made for roundball use only, so in case you got a EMF100 and like to switch over to the original mag feeding system that can feed first strikes. then you can do this with this mag plug the bigger model will just click in place. so is faster in use in field situations for when you want to chance to one mag system to one other mag system.
but will make it look like you are running around with a empty P90. so there is were the PLUG PIN comes in. this will require a extra step. but this will hide the plug bellow a UNW P90 mag or a modded airsoft mag p90

link to the mod ring:
https://cults3d.com/en/3d-model/various/unw-p90-airsoft-mag-mod-ring
https://www.printables.com/model/87733-unw-p90-airsoft-mag-mod-ring

the steps of switching over the different mag platforms can be found in the images.
if you do the steps out of order you will activate the mag before the plug is installed making it releasing all the ammo out of the mag. and dropping it on the ground or fly out of the top.

compatibility note:
this plug is only made to work for the Planet eclipse EMF100/(EMG100)
with the UNW p90 mag mount installed.

Video Links:
demo about the mag plugs at 12:20
https://youtu.be/0uPL_J2TmEE

UNW P90: Template ring for the P90 airsoft mags
https://youtu.be/kufvl5E0RiU

materials needed:

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

Print-bed requirement: the files are designed to work on a ENDER 3 Pro, that haves a print volume of, X 220mm, Y 220mm and Z 250mm. with that said it’s not necessarily maxing out to those sizes…