UNW P90 G11TIPX MAG adapter for tippmann TIPX mags

Updated
(NW23 style slide updated for n23 mag mount)

update: 27 nov 2023
the N23 v2 slide got some better tolerances with the mag mount

update: 28 nov 2023
the N23 v3 slide: I made a upload error this the right model.

———

this one was originally made as a back-up mag option for when the UNW P90 Mags were in there prototype phase. but it proved to be a fun way of playing. so it can be a option for those how like to use there own TIPX mags.

as you can see can you install 2 mags at once. and once 1 mag is empty. then you can switch over to the other mag by selecting the other mag with the Mag cutoff selector.

so you can keep on shooting in a view seconds. and choose to replace the empty may wile standing guard. or just reload the 2 mags at once later.

but do keep in mind that you should only switch from feeding side with the cutoff selector. once the feeding channel that currently is in use is empty. other wise you would chop a paintball in half…

there is a indicator in the back of the adapter. this can give you a signal when you start to run low on that side of the adapter. but do keep in mind there can be still a view paintballs in the feed neck even do it looks like it’s empty. so you can keep track of this window. and see like okay now that the window looks empty. does it mean that I still got 2 rounds left to shoot before I can switch over. or just shoot until it’s empty to be on the save side.

the fun this about this adapter is that you can technically change to this adapter during a game. meaning you could play with the P90 mags and this adapter since it reloads the same basically. but it’s more bulky for sure.

and some may dislike that you will need to use the low profile P90 mag mount at the front.
what I incise does make reloading slightly less easy then with the original P90 mount since that guides the mags in place. but in case of this adapter is that not so relevant. since most of the reloading is done with the Tipx mags it self.

compatibility note:
this will work with all the models that support the low profile front mount for the P90 mags.

mags that work for this adapter:
zetamag 10+10 rounds
Tippmann 12 round mag
Tippmann 7 round mag
OB10 v1.1 mag

Video Links:
UNW P90: G11 styled tippmann Tipx mag adapter
https://www.youtube.com/watch?v=_U-nBrJH1hM
https://odysee.com/@UntangleWORKS:a/UNW-P90-G11:a

materials needed:
1x M3 bolt 10mm in length
1x m3 bolt 40mm in length
Optional: heat shrink tubing for the M3 bolt 35mm long

2x M3 bolt 25mm in length

1x spring 5mm OD, 0.4mm wire, 15mm in length
optional: a 6mm airsoft bb as a detent

2x M2.5 bolt 15mm or 20mm long
1x spring 4mm OD, 0.3mm wire, 15mm in length

2x spring 6mm OD, 0,6mm wire, 10mm in length
2x a piece of 1.75mm filament 16mm in length

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…

Print-bed requirement: the files are designed to work on a ENDER 3 Pro, that haves a print volume of, X 220mm, Y 220mm and Z 250mm. with that said it’s not necessarily maxing out to those sizes…